第一篇：電子工程師(英文）

ELECTRONICS ENGINEER(Experienced)

Sandy Lin 15/F,TOWER2 ,brIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY

Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.pROFESSIONAL WORK EXpERIENCE

Stevenson Data Systems,Los Angeles,CA 1981-1993

Components Evaluation Engineer 1992-1993

Responsible for the characterization and evaluation of, and approved vendors list for:power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for purchasing.promoted to engineer II.Design Evaluation Engineer 1990-1992

Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for pC,ISA bus programmable load board used for environmental testing.performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990

performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATION

Bachelor of Science in Electrical Engineering

--University of Southern California 1990

Associate in Engineering Electronics

--University of Southern California 1981

Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first

第二篇：英文求職信:電子工程師

ELECTRONICS ENGINEER(Experienced)

Sandy Lin 15/F,TOWER2 ,brIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY

Over eleven years of extensive computer/electronics experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for installing/maintaining Arcnet LAN system.proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.pROFESSIONAL WORK EXpERIENCE

Stevenson Data Systems,Los Angeles,CA 1981-1993

Components Evaluation Engineer 1992-1993

Responsible for the characterization and evaluation of, and approved vendors list for:powersupplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for purchasing.promoted to engineer II.Design Evaluation Engineer 1990-1992

Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for pC,ISA bus programmable load board used for environmental testing.performed reliability lift testing on computer systems.Installed/maintained 20 user.Novell,Arcnet LAN system.Examined system and sub-system susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990

performed extensive hardware evaluation ion prototype computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.performed emvironmental,ESD and acoustic testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATION

Bachelor of Science in Electrical Engineering

--University of Southern California 1990

Associate in Engineering Electronics

--University of Southern California 1981

Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first.

第三篇：電子工程師英文求職信寫作

電子工程師英文求職信寫作

ELECTRONICS ENGINEER(Experienced)

Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY

Over eleven years of extensive computer/electronics

experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for

installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCE

Stevenson Data Systems,Los Angeles,CA 1981-1993

Components Evaluation Engineer 1992-1993

Responsible for the characterization and evaluation of, and approved vendors list for:Power supplies,oscillators,crystals,and programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product

profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992

Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20

user.Novell,Arcnet LAN system.Examined system and sub-system

susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990

Performed extensive hardware evaluation ion prototype

computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic

testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATION

Bachelor of Science in Electrical Engineering

--University of Southern California 1990

Associate in Engineering Electronics

--University of Southern California 1981

Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first

第四篇：電子工程師英文求職信

電子工程師英文求職信

英文似乎是國人的弱項，對于英文功底不是很好的求職者來說，寫英文個人求職信往往令他們頭疼。怎樣寫好英文求職信？英文求職信的寫作技巧有哪些呢？大家可以仔細閱讀下文詳細解析，下面是一個電子工程師的個人求職信，僅供參考。

Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.BACKGROUND SUMMARY

Over eleven years of extensive computer/electronics

experience.Versed in both digital and analog electronics withspecific emphasis on computer hardware/software.Special expertise in system and component evaluation.Network supervisor responsible for

installing/maintaining Arcnet LAN system.Proficient in assembly and C programming languages.Excelent communication skills including written,verbal and interpersonal.PROFESSIONAL WORK EXPERIENCE

Stevenson Data Systems,Los Angeles,CA 1981-1993

Components Evaluation Engineer 1992-1993

Responsible for the characterization and evaluation of, and approved vendors list for:Powersupplies,oscillators,crystals,and

programmable logic used in desktop and laptop computers.Evaluated and recommended quality components that increased product

profitability.Created adn developed power supply test plan used for evqluating third party power supplies.Interacted with vendors to

resolve problems associated with components qualification.Technical advisor for Purchasing.Promoted to engineer II.Design Evaluation Engineer 1990-1992

Evaluated new computer product designs ,solving environmental problems on prototype computers.Conducted systems analysis on new computer profucts to ensure hardware,software and mechanical design integrity.Designed hardware and software for PC,ISA bus programmable load board used for environmental testing.Performed reliability lift testing on computer systems.Installed/maintained 20

user.Novell,Arcnet LAN system.Examined system and sub-system

susceptibility to electrostatic discharge in order to meet IEC-801-2 industry standards.Analyzed complete power and load of computer system and subsystem to verify power and load estimations.Assistant Engineer 1981-1990

Performed extensive hardware evaluation ion prototype

computers,tested prototype units for timing violation using the latest state-of-the-art test equipment,digital oscilloscopes and logic analyzers.Performed emvironmental,ESD and acoustic

testing.Designed and built a power-up test used to test prototype computers during cold boot.EDUCATION

Bachelor of Science in Electrical Engineering

--University of Southern California 1990

Associate in Engineering Electronics

--University of Southern California 1981

Job descriptions emphasize candidate's accomploshments.Work history is stated in reverse chronological order,with most recent employment listed first.

第五篇：電子工程師

工作職責：

1、對各類PCB的布線、設計與制作；

2、對各類PCB電子原理圖的制作；

3、對各類現有產品功能設計上的研究與改善，并祥加記錄；

4、對各類委外加工PCB板樣品測試、驗收、確認樣品、制定檢驗標準；

5、對各類產品在制造過程中發生異常的處理、分析、追蹤、提報；

6、對各類新產品的設計開發；

7、對各類新材料供應商的開發，新樣品的確認；

8、協助配合其他工程師。

任職要求：

1、電子專業，熟悉電子元件的使用及規格，熟練操作ALTIUM軟件；

2、有一定的模擬電子和數字電子技術基礎，一年以上LED產品設計和開發經驗，了解產品設計、開發基本流程；

3、良好的溝通及表達能力，性格開朗、思維敏捷，具有團隊意識和強烈的工作責任感，能承受一定的工作壓力；

4、良好的職業素質和敬業精神，身體健康；

5、動手操作能力強、優秀應屆畢業生亦可。

主要職責：

負責執行器產品線性電源、開關電源、隔離輸入輸出通道的設計

任職要求：

電子工程類5年相關工作經驗

無線電等相關專業

精通分立元件、集成運放等電路元器件的應用

精通模擬電路的設計、分析及計算機仿真技術

熟練掌握電容、電感等無源器件的應用

理解電磁兼容相關標準及其解決方案

熟練掌握輸入輸出通道的隔離技術

熟悉電子線路的調試及故障查找及排除工作

職位描述：

1.大學本科以上，電子或自動化工程，3年以上電子電路的設計工作.2.曾有過開發電子產品和量產的工作經歷。

3.懂得MCU編程，燈光控制。

4.掌握電路原理圖設計軟件。

5.精通分立元件、集成運放等電路元器件的應用

6.掌握一到兩種編程語言:C,Verilog,VB等,能夠使用語言進行點屏或平臺開發

7.精通電子電路設計工具。

8.數字/模擬電路原理設計，PCB/FPC布線。

9.熟練掌握輸入輸出通道的隔離技術

10.熟悉電子元件的使用及規格，熟練操作ALTIUM軟件

11.按時按質完成模擬和數字電路的設計，仿真，調試和驗證。

12.理解和完成產品的電子設計，滿足產品的特性、成本和運送要求。